Description
Dual Fuel Kit For Towel Warmers – Kit A. Sol*Aire dual fuel towel rail and radiator kit contains everything needed to both heat your towel rail via electric in the warmer months and switching to central heating in cooler periods when your boiler is active. All in one dual fuel valves maintain the aesthetic symmetry of the towel rail when installing the pipework to it.
Kit A Contains:
- 1 pair of chrome angled round valves
- 1 pair of t-pieces.
- 1 CP electric element
Specifications – CP Electric Element
- CP Electric Element for Heated Towel Rails
- Power Outputs: 100W, 150W, 200W, 250W, 300W, 400W & 600W
- Chrome Finish.
- Quality & Safety Tested.
- IP67 rated – Protected against water jets (bathroom zone 1/2/3)
- Regulates surface temperature of towel rail at approx 60 degrees celcius.
- Fast, efficient heating for electric towel rails and radiators.
- Connection to Towel Rail: 1/2″ BSP
- Power Lead: 1.2m Heat Resistant Cable, No Plug.
- Style: CP On/Off Electric Cartridge Heating Element
- Material: Stainless Steel
- Voltage: 220-240 VAC / 50Hz.
- CE and VDE Approved
- 2 year manufacturer’s guarantee
Specifications – Dual Fuel Radiator Valves
- Type: Dual Fuel Round Control Knobs
- Style: Modern, Contemporary
- UK / EU Tank / Combi System Compatible Standard
- Angled / 90 Degree Bend Connection Type
- Durable, study design
- Material: Solid Brass
- Finish: Chrome Plated
- Socket Thread: ½″ BSP (to connect to towel rail / radiator)
- Pipe connection: 15mm (to connect to central heating piping)
- 2 Year manufacturer’s guarantee
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Manufacturer | |
| Power | |
| Valve Type | |
| Product Shape | |
| Product Length (Mirrors) | |
| Product Diameter (Mirrors) | |
| Mounting Type | |
| Smart | Smart |
| Power (W) | |
| Material | |
| Brand | |
| Colour | |
| Sub-Type | |
| Brand | |
| Type | |
| MPN | |
| Material | Steel |
| Model | |
| Splash Proof Rating | IPX6 |
| Guarantee | 2 years |
| Power Type | Electric & gas |
| Product Type | Electric towel radiator |
| CE Marked (Elements & Mirrors) | CE marked |
| Illuminated (Mirrors) | |
| Product Shape (Mirrors) | |
| Thermostatic Control (Valves) | |
| Power Output |
7 reviews for Dual Fuel Kit A For Towel Warmers: CP Heating Element & Chrome Round Valves
You must be logged in to post a review.
R. F. Stevens –
These left and right handed radiator valves are well made from heavy brass with a good thickness of chrome. It is not possible to reconfigure them as, say, two left handed valves (my requirement).The supplied end caps on the bottom (assuming a tubular towel rail going up from the taps) allow one to use them as either simple angled taps or to later add-in an electric heater element. The taps are system side so allow the heater element to be serviced while only draining down the rad.Apart from the 15mm copper compression ring, all the seals are rubber washers or O-rings so ptfe tape is not required, but the face on the radiator end will need to have a clean smooth metal seating to ensure a good seal.I’ve attached a picture to show the pair of taps supplied to me with the set valve broken down into its bits, and the user valve still assembled because the Az picture was not clear enough about the presence of a bottom cap. I’ve also added a before and after picture of them installed with the heater, and showing the new one on the right having the set adjuster (still accessible with an Allen key) facing the wall because of its 15mm pipe coming from the left.
d***i –
easy transaction, as should be, thanks, A1 item
a***l –
Good product; Very fast delivery; Highly recommended!!!
k***e –
Item exactly as described.. No problems
1***1 –
Excellent service
i***r –
Excellent service.
0***9 –
Fast delivery top seller. Will use again. Thanks. Very helpful too 🙂