New customer? Spend £200 or more and get 5% discount off your order. Use the code onetime5off at checkout.
New customer? Spend £200 or more and get 5% discount off your order. Use the code onetime5off at checkout.
Showing all 6 resultsSorted by popularity
Electric heated towel rails with no timer in the Adax-Solaire range provide straightforward on/off heating for bathrooms where a simple, uncomplicated control is preferred. These rails are hardwired to a fused spur and operated by an external bathroom-compliant pull cord or wall switch located outside the bathroom zone. Available in chrome finish and a range of sizes, they offer an affordable entry point to electric towel rail heating with no programming or app setup required.
Everything you need to know
Electric towel rails with no timer are controlled by the external wall switch or pull cord fitted by the electrician during installation. To heat the rail, switch it on at the wall; to switch it off, use the same switch. Because there is no automatic timer, you will need to remember to switch the rail off manually when it is no longer needed.
Yes. A qualified electrician can fit an external inline timer or a programmable fused spur in place of the standard on/off switch, adding a seven-day timing function without replacing the towel rail itself. Alternatively, a smart plug with a timer function may be suitable depending on how the rail is connected, though bathroom installations must comply with zone requirements.
Yes. Electric towel rails without a built-in timer are generally less expensive than equivalent models with a thermostat and programmer. They are a practical choice for bathrooms where the rail is only used for short periods and the user is comfortable switching it on and off manually. For bathrooms where automation is preferred, a rail with a built-in timer offers better ongoing energy control.
Running cost depends on the wattage of the rail and your electricity tariff. A 60W towel rail running for two hours per day at a typical UK electricity rate of approximately 24p per kWh would cost around 3p per day. A 150W rail under the same conditions would cost around 7p per day. Models with a thermostat cycle on and off, further reducing actual consumption.
Yes. Any fixed electrical installation in a bathroom must be carried out by a qualified electrician regardless of the complexity of the control arrangement. Part P of the Building Regulations and BS 7671 IET Wiring Regulations apply to all bathroom electrical work in England and Wales. The electrician will connect the rail to a dedicated fused spur and ensure the installation is properly notified.
