How much does it cost to run an electric panel heater?

Running cost depends on output and usage. A 1500W panel heater running for one hour uses 1.5 kWh of electricity. At the current Ofgem price cap rate of approximately 24p per kWh, that equates to roughly 36p per hour at full output. In practice, a built-in thermostat means the heater cycles on and off to maintain temperature, so actual hourly costs are typically lower than the maximum figure.

Do electric panel heaters need professional installation?

Most Adax panel heaters can be wall-mounted and connected to a fused spur without a qualified electrician, using the fixings and bracket supplied. However, if the installation requires new fixed wiring - such as adding a fused connection unit or a new circuit - this is notifiable work under Part P of the Building Regulations in England and Wales and must be carried out or certified by a registered electrician.

Can I control an Adax panel heater with my phone?

Yes. WiFi-enabled Adax panel heaters connect to the Adax Home app, available free on iOS and Android. The app allows you to set heating schedules, adjust temperature remotely, and monitor energy use. The heater connects directly to your home's 2.4GHz WiFi network - no hub or additional smart home hardware is required. Voice control via Amazon Alexa and Google Assistant is also supported on compatible models.

What size panel heater do I need for my room?

As a general guide, allow approximately 80W per square metre for most rooms. A 15m² bedroom would typically suit a 1200W heater; a 20m² open-plan living area around 1600W. For older properties with poor insulation, sizing up slightly is advisable. If you are unsure, the Adax Solaire team on 01325 717 899 can advise based on your room dimensions and property type.

What is the difference between the Adax Neo and the Adax Clea?

Both are WiFi-enabled electric panel heaters with thermostat control and Adax Home app compatibility. The Adax Neo is the core range model with a compact but conventional profile, well-suited to most residential rooms. The Adax Clea is an ultra-slim design - typically around 5cm in depth - intended for modern interiors where a minimal appearance is a priority. Both ranges offer similar wattage options and feature sets.